It is impossible to include a high amount of oil in a typical shower gel. However, because shower or bath oils are mostly oils, they are simple, but they lack foam and bubbles. With this formula, using a mild surfactant, you can create a shower oil with lots of foam and bubbles.
Prefer to watch a video instead? Click here
KEY INGREDIENTS
1. Plantapon WW-CF
Good foaming performance vs alkanolamide-containing benchmarks, even in the presence of high oil content. It is cold processable, easily provides a transparent formula, does not require preservative and palm-based raw materials certified sustainable RSPO Mass Balance.
Typical dosage : 20 - 70%
INCI : MIPA-Laureth Sulfate (and) Laureth-4 (and) Propylene Glycol
Procedure
Step 1
First, weigh Phase A in a container and mix well.
Step 2
Next, add Phase B into Phase A and mix well.
Step 3
Pour your mixture into a suitable container.
Notes
When substituting or adding ingredients, always ensure that the total percentage in the formula is 100%.
You can substitute Plantapon WW-CF with Lumorol K 5229 or Oil Soap™.
Don't forget to look out for our next post on more formulas.
Happy learning!
#bespokeformula #bespokeeducation